|
|
| Heat Exchanger > Heat Exchanger Misc |
Heat Exchanger Misc |
 |
1990 Turbo Refrigeration HTD-Series Falling Film Plate Style Heat Exchanger |
| Mfg: Turbo Refrigeration |
Model:HTDF481206 DX. |
| Stock No. ENAE63334. |
Serial: 901220 |
| 1990 Turbo Refrigeration HTD-Series Falling Film Plate Style Heat Exchanger. Model: HTDF481206 DX. S/N: 901220. Flow rate: 200 GPM. Input horsepower: 50 hp. Refrigeration load: 42 tons. Refrigerant: R22-DX. Refrigerant temperature: 26 °F. Standard plate size: (6) 48 in. W x 60 in. H. Fluid: water (temperature on: 41 °F, temperature off: 36 °F). Reservoir capacity: 500 gallons. HTD-series (high temperature difference) units are used when fluids are either heated or chilled over large temperatures differences ranging from 5 to 60 °F. Includes insulated sump tank. Front and back double door access. Inlets: (2) 3/4 in. dia. ports (refrigerant), (1) 3 in. dia. copper tube (water supply). Outlets: (1) 1 in. dia. discharge port, (2) 2-1/2 in. dia. tubes (refrigerant suction), (1) 5 in. dia. NPT (male, pump), (1) 5 in. dia. NPT (male, overflow). Overall dimensions: 79 in. L x 66 in. W x 10 ft. 4 in. H.
|
|
|
|
APV Dual Tube Cooker |
| Mfg: APV |
Model: |
| Stock No. tSPPM01b. |
Serial: |
| APV Dual Tube Cooker. Upper/lower tube dimensions: 7-1/2 in. dia. x 84 in. L. Auger screw diameter: 7 in. Upper tube motor and gear drive: Baldor Industrial Motor, 1 hp, 1725 rpm, 208-230/460 V, 3.5-3.2/1.6 amps, 60 Hz, 3 phase. Sterling Electric Speed-Trol Variable Speed Drive, 4200 rpm (max), 700 rpm (min). Lower tube motor and gear drive: Baldor Super-E Motor, 1-1/2 hp, 1740 rpm, 230/460 V, 4/2 amps, 60 Hz, 3 phase. Nord Motor Drive, 112.23 ratio, 16 rpm (final). Inlets: (1) 15-3/4 in. L x 15 in. W infeed hopper, (1) 4 in. dia. Q-line fitting. Outlets: (1) 3 in. dia. Q-line fitting. Overall dimensions: 12 ft. L x 55 in. W x 64 in. H.
|
|
|
|
Groen Capkold Bottom-Jacketed Cook Tank |
| Mfg: Groen |
Model:CookTank |
| Stock No. SPPP983c.20a |
Serial: 128891 |
| Groen Capkold Bottom-Jacketed Cook Tank. Model: CookTank. S/N: 128891. Stainless steel. MAWP 100 psi @ 338 °F. Inside dimensions: 63 in. L x 32 in. W x 34 in. H. (4) 58-1/2 in. L x 24 in. W x 5 in. H wire baskets with (5) 24 in. L x 11 in. W x 5 in. H sections. High performance water circulating pump and rear mounted, water-cooled heat exchanger. Strut-assisted top. Prepiped connections. Lifting rack for easy hoist removal. Inlets: (1) 3/4 in. dia. port (cooking media), (1) 3/4 in. dia. NPT (female, jacket), (1) 1-1/2 in. dia. port (cooking media level indicator), (1) 2 in. dia. bevel fitting with hex (heat exchanger water), (1) 3 in. dia. port (cooking media circulation). Outlets: (1) 3/4 in. dia. NPT (female, jacket), (1) 1-1/2 in. dia. port (tank dischage), (1) 2 in. dia. NPT (male, heat exchanger water), (2) 2 in. dia. ports (cooking media circulation). Overall dimensions: 88 in. L x 47 in. W x 49 in. H. ACN840
|
|
|
|
Chester Jensen Falling Film Plate Chiller |
| Mfg: Chester Jensen |
Model: |
| Stock No. HDAF525.56a |
Serial: |
| Chester Jensen Falling Film Plate Chiller. Cooling capacity: 140 tons at 224 gpm for a 26°F suction with a 15° TD. Total cooling section area: 299 sq. ft. (7) Plates with 32 corrugations each. S/N’s: 66179, 36322, 36185, 36014, 47300, 36465, 47317. Nat’l Bd: 22943, 7150, 7050, 6963, 12943, 7243, 12947. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 32. Reservoir Tank- 280 Gallon, inside straight-wall dimensions: 5 ft. 10 in. L x 3 ft. 7 in. W x 1 ft. 10 in. H. Inlets: (1) 1-1/4 in. dia. FNPT, (1) 1-1/2 in. dia. liquid port, (1) 3 in. dia. liquid port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 1-1/4 in. dia. FNPT (drain), (1) 2 in. dia. FNPT (drain), (1) 2 in. dia. S-line (overflow), (1) 2 in. dia. S-line (discharge), (1) 2-1/2 in. dia. S-line (discharge), (1) 4 in. dia. S-line (discharge), (1) 4 in. dia. refrigerant suction port. Overall dimensions: 8 ft. 10 in. L x 4 ft. W x 8 ft. H.
|
|
|
|
Frozen Juice System |
| Mfg: |
Model: |
| Stock No. JMB522aa.110 |
Serial: |
| Frozen Juice System. Designed to take 3000 gallons per hour of frozen orange juice (0 degrees F), melt, grind, and liquefy it to a pumpable stage of 34 °F. Entire system consists of roller conveyor track, vertical lift dumper, stainless steel thaw tunnel, stainless steel food chopper, 400 gallon tank with agitator, and Tri-Clover positive displacement pump. Roller conveyor track features (14) rollers suspended in a 78 in. L x 37-1/2 in. W x 16 in. H frame. Height at conveyor inlet: 14 in. Maximum aperture/clearance: 25 in. L x 24 in. W. Vertical lift has ability to dump product at a height of 14 ft. Lift is driven by a 2 hp Baldor Industrial Motor coupled to a Reynard Wormgear Speed Reducer with a ratio of 60:1 and a final rpm of 28.83. Product travels down through a 30 in. L x 29 in. W stainless steel tunnel into a stainless steel food chopper. Food chopper has (2) 12 in. dia. x 28 in. L press rollers. Chopper is activated by a 40 hp U.S. Motor coupled to a U.S. Motor Drive, with an output rpm of 350.79. A 400 Gallon Double Jacketed, Sloped-Bottom Stainless Steel Tank mixes and blends product with a (4) paddle agitator. Agitator blades are 11-1/2 in. L x 4 in. W. A 5 hp Lincoln AC Motor in conjunction with a Winsmith Speed Reducer, with a final rpm of 58.16, provide the power to rotate the agitator. A 9 in. L x 2 in. W tank outlet feeds into a Tri-Clover Positive Displacement Pump inlet. Pump has a 3 in. dia. outlet. Overall dimensions: 20 ft. L x 70 in. W x 9 ft. 6 in. H.
|
|
|
|
AK Robins Screw Cooker |
| Mfg: AK Robins |
Model: |
| Stock No. AARF008.18 |
Serial: |
| AK Robins Screw Cooker. Stainless steel. Top hopper: 30 gallon with screw auger: 36 in L x 4 in diameter. Middle hopper: 20 gallon with screw auger: 48 in. L x 7 in. diameter. Cooking container: 100 gallon with (3) screw augers: 31 in. L x 16 in. diameter. (3) Steam jacket lines with (49) steam inlets: 3 in. threaded male openings. Discharge screw auger: 19-1/2 in L x 4-1/4 diameter. Discharge opening: 4-1/2 in. diameter pipe. Discharge height: 44 in. (3) Motors for the processing screws; (1) motor for discharge screw. Overall dimensions: 18 ft. 6 in. L x 32 in. W x 84 in. H.
|
|
|
|
Chester Jensen Falling Film Plate Chiller |
| Mfg: Chester Jensen |
Model:BG-4-0T-4-36-60 |
| Stock No. HDNP507.6 |
Serial: 7229 |
| Chester Jensen Falling Film Plate Chiller. Model: BG-4-0T-4-36-60. S/N: 7229. Number of plates: 4. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 36. Reservoir Tank- 130 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 5 in. H. Inlets: (1) 1-1/2 in. dia. liquid feed port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. NPT (discharge), (1) 3 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 4 in. L x 2 ft. 8 in. W x 7 ft. 7 in. H.
|
|
|
|
1994 Chester Jensen Ammonia Plate Chiller |
| Mfg: Chester Jensen |
Model:XB16-01-16-32 |
| Stock No. pHDMD467.68 |
Serial: 9404-P |
| 1994 Chester Jensen Ammonia Plate Chiller. Model: XB16-01-16-32. S/N: 9404-P. Chills liquid product instantly and continuously to 33°-34° F. Maximum flow rate per 32 corrugation section: 3,000 gph. (16) Plate sections. Standard section dimensions: 61-11/16 in. W x 43-1/8 in. H. Inlets: (1) 7 in. dia. port (product), (1) 5 in. dia. refrigerant feed pipe. Outlets: (1) 4 in. dia. refrigerant gas discharge pipe. 1994 Surge Tank- 150 Gallon. S/N: 43853. Nat'l Bd: 40959. MAWP @ 650 °F: 200 psi. MDMT @ 200 psi: -20 °F. Overall dimensions: 10 ft. 4 in. L x 86 in. W x 69 in. H.
|
|
|
|
Chester Jensen Falling Film Plate Chiller |
| Mfg: |
Model: |
| Stock No. HD-PW229.20 |
Serial: |
| Chester Jensen Ammonia Liquid Plate Chiller. Nominal cooling capacity: 300 tons at 480 gpm., holding a maximum of 15 plates. Current cooling capacity: 200 tons at 320 gpm for a 26°F suction with a 15° TD. holding currently, 10 plates. Current total cooling section area: 427.5 sq. ft. (10) plates with 36 corrugations each. Plate dimensions: 5 ft. 2 in. L x 3 ft. 7 in. H. Ref. No’s: 11602, 11604, 11598, 11600, 11599, 11595, 11596, 11603, 11599, 11601. Inlets: (2) 2 in. dia. liquid feed ports, (1) 4 in. dia. S-line fitting (liquid feed), (1) 4 in. dia. refrigerant feed port. Outlets: (1) 4 in. dia. FNPT liquid discharge, (1) 4 in. dia. refrigerant suction port, (1) 6 in. dia. FNPT liquid discharge. Overall dimensions: 8 ft. 6 in. L x 6 ft. 9 in. W x 7 ft. 2 in. H.
|
|
|
|
2000 Chester-Jensen Falling Film Plate Chiller |
| Mfg: Chester Jensen |
Model:XB4-0T-2-32 |
| Stock No. DCBJ884.29 |
Serial: 0013-P |
| 2000 Chester-Jensen Falling Film Plate Chiller. Model: XB4-0T-2-32. S/N: 0013-P. Nat’l Bd: 2490 and 24899. Refrigerant: R-22. Number of plates: 2. Plate dimensions: 5 ft. 9 in. L x 3 ft. 9 in. H. Number of corrugations: 32. MAWP: 200 psi @ 200°F. MDMT: -20°F @ 200 psi. Reservoir Tank- 40 Gallon, inside straight-wall dimensions: 5 ft. 6 in. L x 2 ft. 4 in. W x 9 in. H. Chester Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Inlets: (1) 3/4 in. dia. hot gas infeed port, (1) 1 in. dia. high pressure liquid feed port, (1) 2 in. dia. refrigerant feed port, (1) 2 in. dia. liquid feed port. Outlets: (1) 3 in. dia. S-line liquid discharge, (1) 3 in. dia. refrigerant suction port. Overall dimensions: 88 in. L x 32-1/2 in. W x 68 in. H.
|
|
|
|
Chester Jensen Falling Film Plate Chiller |
| Mfg: Chester Jensen |
Model:BG-4-0T-4-36-60 |
| Stock No. HDNP508.6 |
Serial: 7230 |
| Chester Jensen Falling Film Plate Chiller. Model: BG-4-0T-4-36-60. S/N: 7230. Number of plates: 4. Plate dimensions: 5 ft. L x 3 ft. 9 in. H. Number of corrugations: 36. Reservoir Tank- 130 Gallon, inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 5 in. H. Inlets: (1) 1-1/4 in. dia. liquid feed port, (1) 1-1/2 in. dia. liquid feed port, (1) 3 in. dia. refrigerant feed port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. NPT (discharge), (1) 3 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 7 in. L x 3 ft. 3 in. W x 6 ft. 10 in. H.
|
|
|
|
1993 Chester Jensen Plate Chiller |
| Mfg: Chester Jensen/York |
Model:XD-30-30-32 |
| Stock No. BIIR7001. |
Serial: 9303-CP |
| 1993 Chester Jensen Plate Chiller. Model XD30-30-32. S/N 9303-CP. (30) Plates. Chilling liquid from 75 °F to 33 °F with a single pass takes up to 20 tons of refrigerant per plate or 600 tons, based on 14,500 gph or 240 gpm. Chilling liquid from 45°F to 33°F takes 6 tons per plate. Maximum flow rate per plate is 50 gpm. Unit maximum flow rate: 90,000 gph or 1,500 gpm. CIP'able. Inlets: (4) 1-1/2 in. dia. S-line (sprayballs), (1) 1-1/2 in. dia. S-line fitting, (1) 2 in. dia. S-line fitting, (1) 4 in. dia. I-line fitting (product), (1) 5-1/2 in. dia. pipe (ammonia). Outlets: (2) 2 in. dia. S-line fittings, (1) 4 in. dia. S-line fitting, (1) 4-1/2 in. dia. pipe (ammonia). Overall dimensions: 11 ft. 5 in. L x 96 in. W x 84 in. H.
|
|
|
|
Hot Water Set |
| Mfg: Not Specified |
Model: |
| Stock No. CPI02 |
Serial: |
| Hot Water Set, top vessel 12 in. dia. x 60 in. L with level glass tube, bottom vessel 15 in. dia. x 103 in. L, mild steel frame. Overall dimensions 127 in. L x 33 in. W x 47 in. H.
|
|
|
|
1999 Brine Chill Cabinet |
| Mfg: |
Model: |
| Stock No. RBFM732.65 |
Serial: 232612940NLBC4 |
| 1999 Brine Chill Cabinet. S/N: 232612940NLBC4, 3-door, 3 lane rail style, 196 in. w x 10 ft. 4 in. x 31 ft.
|
|
|
|
Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates |
| Mfg: Vogt Ice |
Model: |
| Stock No. 300.280 |
Serial: |
| (120) Vogt Ice Turbo Ice Machine Stainless Steel Falling Film Plates. Material of construction: 304 stainless steel. Number of corrugations: 16. These are designed to fit the Vogt Ice Turbo Ice Machine model: HP1000A SC. Inlets/outlets: (2) 1/2 in. dia. ports. Overall dimensions: 2 ft. 6-1/2 in. L x 1-1/2 in. W x 5 ft. 3 in. H.
|
|
|
|
Dunham-Bush Boiler Feed Pump System |
| Mfg: Dunham-Bush |
Model:PCHPD1468 |
| Stock No. HDNW103c.4 |
Serial: 17850 |
| Dunham-Bush Boiler Feed Pump System. Model PCHPD1468, S/N 17850. Complete with 10 ft. L x 18 in. W Shell and tube heat exchanger, tank, pumps, valves and controls.
|
|
|
|
Stainless Steel CIP Skid |
| Mfg: Not Specified |
Model: |
| Stock No. SFEP003.6a |
Serial: |
| Stainless Steel CIP Skid. S.O: 2925. 180-Gallon stainless steel tank. 18-Gallon stainless steel vacuum tank. Control requirements: 480 V, 20 amps, 60 Hz, 3 phase. APV Recirculating Centrifugal Pump, Model: 16V2, S/N: 100268162. Sterling Electric Motor, 1-1/2 hp, 1750 rpm, 208-230/460 V, 4.84-4.38/2.19 amps, 60 Hz, 3 phase. Overall dimensions: 100 in. L x 33-1/2 in. x 78 in. H.
|
|
|
|
Stainless Steel Ammonia Plate Chiller |
| Mfg: |
Model: |
| Stock No. SFEP044b.4 |
Serial: |
| Stainless Steel Ammonia Plate Chiller. (3) 60 in. L x 31 in. H plates. Number of corrugations: 16. The Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Spray bridge dimensions: 59 in. L x 12 in. W. Sump tank dimensions: 68 in. L x 19-1/2 in. W. Inlets: (1) 2 in. pipe (media), (1) 2 in. 'S' line (product). Outlets: (1) 1 in. pipe (discharge), (1) 2 in. pipe (media). Overall dimensions: 73 in. L x 26 in. W x 75 in. H.
|
|
|
|
1998 Chester Jensen Plate Chiller |
| Mfg: Chester Jensen |
Model:B-4-0T-3-21 |
| Stock No. SFEP1012b. |
Serial: 9842-P |
| 1998 Chester Jensen Plate Chiller. Model: B-4-0T-3-21. S/N: 9842-P. Number of corrugations per section: 21. Plate chiller uses (3) 62 in. W x 30 in. H sections. Chester Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Chiller is equipped with a 10-Gallon oil tank and controls and valves. Inlets: (1) 1 in. dia. pipe (product), (1) 2 in. dia. media pipe. Outlets: (1) 2 in. dia. S-line fitting (overflow), (1) 2 in. dia. S-line (discharge), (1) 3 in. dia. media port. Overall dimensions: 9 ft. 3 in. L x 33 in. W x 95 in. H.
|
|
|
|
1992 Chester Jensen Plate Chiller |
| Mfg: Chester Jensen |
Model:XB-4-0T-2-21 |
| Stock No. SFEP1016b. |
Serial: 9236-P |
| 1992 Chester Jensen Plate Chiller. Model: XB-4-0T-2-21. S/N: 9236-P. Stainless steel construction. Number of corrugations per section: 21. Chiller uses (2) 62 in. L x 30 in. H plate sections. Chester Jensen Plate Chillers provide a sanitary means to instantly, continuously, and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point. The unique internal construction features inherent in the "Short Gas Flow" plate design minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, assures highest possible heat transfer coefficient and maximizes tons per horsepower ratio. Inlets: (1) 1 in. dia. port (product), (1) 1 in. dia. media ports. Outlets: (1) 1 in. dia. NPT (male), (1) 2 in. dia. NPT (male), (1) 2 in. dia. NPT (overflow), (1) 2 in. dia. media discharge. Overall dimensions: 84 in. L x 35 in. W x 104 in. H.
|
|
|
|
2002 Chester-Jensen Chiller Plate |
| Mfg: Chester-Jensen |
Model: |
| Stock No. CAJB002. |
Serial: 71953, 71955 |
| (2) 2002 Chester-Jensen Chiller Plates. S/N's: 71953 and 71955. P/N: B-3559. Maximum pressure: 100 psi. (21) Corrugations. Inlets/outlets: (1) 1-1/2 in. dia. ports. Overall dimensions: 69 in. L x 2-1/2 in. W x 30 in. H.
|
|
|
|
APV Crepaco Amerio Horizontal Plate Freezer |
| Mfg: APV Crepaco |
Model:Amerio |
| Stock No. EELD809.13 |
Serial: C-0947 |
| APV Crepaco Amerio Horizontal Plate Freezer. S/N: C-0947. (17) 5 ft. 1 in. L x 3 ft. 8 in. W plates. Plate material: sea water resistant aluminum. Distance between plates: 2-7/16 in. (25) 1 ft. 8-3/4 in. L x 11-3/4 in. W x 2-1/4 in. H. product trays. Stainless Steel Control Panel, 2 ft. W x 2 ft. H. Plate freezer used for the rapid freezing of seafood, meats and meat products, poultry, vegetables, and other food products. Inlets: (2) 3/4 in. nitrogen infeed FNPT fittings, (1) 5 ft. 9 in. W x 6 ft. 9 in. H product infeed. Outlets: (1) 1-1/4 in. dia. FNPT fitting, (1) 5 ft. 9 in. W x 6 ft. 9 in. H product discharge. Overall dimensions: 8 ft. 8 in. L x 6 ft. 3 in. W x 8 ft. 11 in. H.
|
|
|
|
Chester Jensen Stainless Steel Plate Water Chiller with 140 Gallon Surge Drum |
| Mfg: Chester Jensen |
Model: |
| Stock No. scEELD669C.12a |
Serial: |
| Chester Jensen Stainless Steel Plate Water Chiller with 140 Gallon Surge Drum. Cooling capacity: 100 tons at 160 gpm for a 26°F suction with a 15° TD. Total cooling section area: 213.75 sq. ft. (5) Plates with 36 corrugations each. Plate s/n's: 36057, 36060, 36075, 35947, 36047. Plate Nat'l Bd. No's: 6985, 6988, 6999, 6916, 6975. Plate dimensions: 5 ft. 2 in. L x 3 ft. 9 in. H. Number of corrugations per plate: 36. Maximum design pressure: 300 psig. Minimum temperature: -50°F. Reservoir capacity: 160 gal. Inside straight-wall dimensions: 5 ft. 5 in. L x 2 ft. 4 in. W x 1 ft. 9 in. H. Inlets: (1) 4 in. dia. port, (1) 2 in. dia. port. Outlets: (1) 4 in. dia. port, (1) 3-1/2 in. dia. flanged port. Overall dimensions: 8 ft. 5-1/2 in. L x 3 ft. 9 in. W x 7 ft. 5 in. H. Surge Drum- 140 Gallon, inside straight-wall dimensions: 2 ft. dia. x 6 ft. L. (2) Hansen Technologies Float Switches, Type: HLL, refrigerants: NH3, R-12, R-22, R-502, power supply: 120/240 V, 10 amps, 50/60 Hz. (2) Hansen Technologies Relief Valves, Cat. No: H5601, capacity: 476 scfm, set pressure: 150 psi. Inlets: (1) 1 in. dia. liquid refrigerant port. Outlets: (2) 1 in. dia. NPT (safety relief), (2) 3 in. dia. wet suction ports, (1) 4 in. dia. liquid outlet, (1) 4 in. dia. compressor suction port. Inlets: (1) 1 in. dia. liquid feed port. Outlets: (2) 3 in. dia. compressor suction ports, (1) 4 in. dia. liquid outlet port, (1) 4 in. dia. wet suction port. Overall dimensions: 8 ft. 8 in. L x 3 ft. 2 in. W x 5 ft. 6 in. H.
|
|
|
|
Chester-Jensen Falling Film Plate Chiller |
| Mfg: Chester-Jensen |
Model: |
| Stock No. KPSB190.31 |
Serial: |
| Chester-Jensen Falling Film Plate Chiller. Cooling capacity: 160 tons at 256 gpm for a 26°F suction with a 15° TD. Total cooling section area: 342sq. ft. (8) Plates with 32 corrugations each. S/N’s: 50309, 51982, 50323, 50333, 50160, 50153, 50321, 511981. Nat’l Bd: 14212, 14887, 14211, 14221, 14109, 14103, 14205, 14885. Plate dimensions: 5 ft. 2 in. W x 3 ft. 10 in. H. Number of corrugations: 32. MAWP: 200 psi @ 200 °F. Reservoir capacity- 750 Gallon, inside straight-wall dimensions: 6 ft. 10 in. L x 4 ft. W x 3 ft. 9 in. H. Inlets: (1) 1-1/2 in. dia. PVC port, (1) 1-1/2 in. dia. (media). Outlets: (1) 1-1/2 in. dia. port, (1) 2-1/2 in. dia. FNPT, (1) 4 in dia. suction port (media). Overall dimensions: 8 ft. L X 4 ft. 8 in. W X 8 ft. 2 in. H.
|
|
|
|
1993 Chester-Jensen Falling Film Plate Chiller |
| Mfg: Chester-Jensen |
Model:B-4-0T-4-32 |
| Stock No. KAAM0240.17 |
Serial: 9355-P |
| 1993 Chester-Jensen Falling Film Plate Chiller. Model: B-4-0T-4-32. S/N: 9355-P. (4) 5 ft. L x 4 ft. 9 in. H stainless steel sections. Number of corrugations: 32. MAWP: 200 psi @ 200 °F. MDMT: -20 °F @ 200 psi. Reservoir capacity: 100 gal. Inlets: (1) 3 in. dia. port (water/solution), (1) 3 in. dia. media port. Outlets: (1) 2 in. dia. NPT (overflow), (1) 3 in. dia. port (water/solution), (1) 3 in. dia. media port. Overall dimensions: 6 ft. 10-1/2 in. L x 2 ft. 9 in. W x 6 ft. 9 in. H (8 ft. 1 in. H with feet). (ACN313).
|
|
|
|
1999 Mueller Recirculated Ammonia Falling Film Plate Chiller |
| Mfg: Mueller |
Model:1050 FFC |
| Stock No. KAAM0338.32 |
Serial: 234728-1 |
| 1999 Mueller Recirculated Ammonia Falling Film Plate Chiller. Model: 1050 FFC. S/N: 234728-1. (3) 8 ft. W x 4 ft. H heat transfer sections. Design pressure: 250 psi. Design temperature: 200 °F. Test pressure: 331 psi. Volume: 1.26 cu. ft. Refrigerant: recirculated ammonia. Reservoir capacity: 1050 gallon. The Mueller 4 x 8 enclosed-type falling film chiller is fully enclosed to ensure product is free from airborne particles and is easily accessible through gasketed doors. Comprised of 304 stainless steel water contact surfaces and outer jacket, this unit has expansion capabilities to include 24 plates. Inlets: (1) 4 in. dia. NPT (water/solution), (1) 4 in. dia. refrigerant infeed port. Outlets: (2) 2 in. dia. FNPT (chilled water/solution) discharge, (1) 4 in. dia. FNPT overflow, (2) 4 in. dia. refrigerant ports. Overall dimensions: 12 ft. 1 in. L x 8 ft. 10 in. W x 7 ft. 7-1/2 in. H. (ACN360). FAD
|
|
|
|
Turbo Refrigeration Company Falling Film Plate Chiller |
| Mfg: Turbo |
Model:HTDA480603 |
| Stock No. pBBCF087.40 |
Serial: 8801600 |
| Turbo Refrigeration Company Falling Film Plate Chiller. Model: HTDA480603. S/N: 8801600. Number of plates: 3. Plate dimensions: 4 ft. W x 5 ft. H plates. Number of corrugations: 32. Reservoir Tank- 1,040 Gallon, inside straight-wall dimensions: 7 ft. 4 in. L x 5 ft. 4 in. W x 3 ft. 7 in. H. Inlets: (1) 1-1/2 in. dia. refrigerant feed port, (1) 2 in. dia. S-line fitting (liquid infeed). Outlets: (2) 2 in. dia. S-line fittings (liquid discharge), (1) 3 in. dia. S-line fitting (liquid discharge), (1) 4 in. dia. NPT overflow drain port, (1) 4 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 8 in. L x 5 ft. 8 in. W x 10 ft. 7 in. H.
|
|
|
|
Stainless Steel Falling Film Plate Chiller |
| Mfg: |
Model: |
| Stock No. pBBCF129.60 |
Serial: |
| Stainless Steel Falling Film Plate Chiller. Refrigerant: NH3 (ammonia). Number of plates: 16. Plate dimensions: 5 ft. 7 in. L x 3 ft. 8 in. H. Number of corrugations: 22. Reservoir Tank- 590 Gallon, inside straight-wall dimensions: 6 ft. 4 in. L x 7 ft. 3 in. W x 2 ft. H. Inlets: (1) 1-1/2 in. dia. refrigerant feed port, (1) 2 in. dia. liquid feed. Outlets: (1) 2 in. dia. NPT liquid discharge, (1) 4 in. dia. refrigerant suction port, (1) 6 in. dia. female I-line discharge. Overall dimensions: 10 ft. 1 in. L x 6 ft. 8 in. W x 7 ft. 5 in. H.
|
|
|
|
Chester Jensen Falling Film Plate Chiller |
| Mfg: Chester Jensen |
Model: |
| Stock No. pBBCF158C.35 |
Serial: |
| Chester Jensen Falling Film Plate Chiller. S/N's: 36004, 37642, 37456, 37552, 37690, 37547, 37639, 37589. Nat'l Bd: 6955, 7989, 7855, 7925, 8024, 7920, 7986, 7952. Number of plates: 8. Plate dimensions: 5 ft. W x 3 ft. 9 in. H. Number of corrugations: 36. MAWP: 200 psi @ 200°F. Reservoir capacity: 100 gal, inside straight-wall dimensions: 7 ft. L x 3 ft. W x 8 in. H. Inlets: (1) 3 in. dia. refrigerant feed port. Outlets: (1) 4 in. dia. S-line drain port, (2) 3 in. dia. refrigerant suction ports. Overall dimensions: 9 ft. 4 in. L x 3 ft. 4-1/2 in. W x 5 ft. 1/2 in. H.
|
|
|
|
Chester Jensen Ammonia Plate Chiller |
| Mfg: Chester Jensen |
Model:XB-36-OT-36-32 |
| Stock No. pCFPH708. |
Serial: 8908-P |
| Chester Jensen Ammonia Plate Chiller. Model: XB-36-OT-36-32. S/N: 8908-P. Cooling capacity: 720 tons at 1152 gpm for a 26°F suction with a 15° TD. (36) Plates with 32 corrugations each. Total cooling section area: 1,539 sq. ft. Plate dimensions: 5 ft. W x 45 in H. Chester Jensen plate chillers continuously and safely chill water, brine, glycols and other homogenous fluids to within 1°F of their freezing point by utilizing a unique internal construction feature inherent in the "Short Gas Flow" plate design that minimizes refrigerant pressure drop, facilitates rapid evacuation and replacement of spent vapor, and assures the highest possible heat transfer coefficient, thus maximizing tons per horsepower ratio. Stainless steel tank. 14 ft. L x 7 ft.10 in. W x 7 ft.10 in. H.
|
|
|
|
Chester Jensen Stainless Steel Chiller Unit |
| Mfg: Chester Jensen |
Model: |
| Stock No. MBFM269A.20 |
Serial: |
| Chester Jensen Stainless Steel Chiller Unit.
|
|
|
|
Dean Products Inc. Immersion Bank Assembly |
| Mfg: Dean Products Inc. |
Model: |
| Stock No. KRZY002. |
Serial: 14405 |
| Dean Products Inc. Immersion Bank Assembly. S/N: 14405. MAWP: 238 psi @ 366 °F. Consists of (10) 15 ft. 8 in. L x 24 in. W heat transfer immersion sections. 304 SS. Reduces condensate build-up common with typical "header" and "multiple header" die-formed embossed plate heat exchangers. Reduces "fatigue failure" caused by condensate build-up and problems common to conventional pre-formed heat transfer surfaces. Applications include high pressure, high temperature, or corrosive environments. Inlets/outlets: 3 in. dia. ports. Overall dimensions: 16 ft. 3 in. L x 32 in. W x 23 in. H.
|
|
|
|
Paul Mueller Plate Chiller |
| Mfg: Paul Mueller |
Model: |
| Stock No. RBFM706.65 |
Serial: E22977 |
| Paul Mueller Plate Chiller. S/N: E22977. National Board No. 12826. All stainless steel cabinet, 12 plates, dimple jacketed, 150 psi.
|
|
|
|
Dean Products Inc. Immersion Bank Assembly |
| Mfg: Dean Products Inc. |
Model: |
| Stock No. KRZY003. |
Serial: 14405 |
| Dean Products Inc. Immersion Bank Assembly. S/N: 14405. MAWP: 238 psi @ 366 °F. Consists of (10) 15 ft. 8 in. L x 24 in. W heat transfer immersion sections. 304 SS. Reduces condensate build-up common with typical "header" and "multiple header" die-formed embossed plate heat exchangers. Reduces "fatigue failure" caused by condensate build-up and problems common to conventional pre-formed heat transfer surfaces. Applications include high pressure, high temperature, or corrosive environments. Inlets/outlets: 3 in. dia. ports. Overall dimensions: 16 ft. 3 in. L x 32 in. W x 23 in. H.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC073.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 50.6kw, 36 in. W x 24 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC074.3 |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 38.8kw, 42 in. W x 18 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFXU |
| Stock No. DLEC075.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFXU. 22.5kw, 46 in. W x 12 in. H 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC076.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 20.6kw, 40 in. W x 12 in. H.460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC077.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 20.6kw, 40 in. W x 12 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC079.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 16.9kw, 28 in. W x 14 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC080.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 16.5kw, 18 in. W x 18 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC081.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 15.4kw, 24 in. W x 14 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC083.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 14.9kw, 18 in. W x 18 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFXU |
| Stock No. DLEC084.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFXU. 14.2kw, 26 in. W x 14 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFXU |
| Stock No. DLEC085.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFXU. 13.1kw, 24 in. W x 12 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC086.a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 8.5kw, 18 in. W x 12 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC087.1a |
Serial: 201-153332 |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. S/N: 201-153332. 6.3kw, 16 in. W x 12 in. H. 460/3/50-60.
|
|
|
|
2004 Indeeco Electric Reheat Coil |
| Mfg: Indeeco |
Model:TFZU |
| Stock No. DLEC088.1a |
Serial: |
| 2004 Indeeco Electric Reheat Coil. Model: TFZU. 1.7kw, 10 in. W x 6 in. H. 460/3/50-60.
|
|
|
|
Insulated Tubes |
| Mfg: |
Model: |
| Stock No. SSPN280.4a |
Serial: |
| (4) Insulated Tubes. Stainless steel construction. Tube dimensions: 4 in. dia. x 36 in. L. Inlets: (2) 3/8 in. dia. quick connect fittings, (1) 4 in. dia. I-line fitting (female). Outlets: (1) 4 in. dia. S-line fitting. Overall dimensions: 55 in. L x 6 in. W x 11 in. H.
|
|
|
|
Chromalox Immersion Electric Heater Coil |
| Mfg: Chromalox |
Model: |
| Stock No. DCBJ656.2a |
Serial: |
| Chromalox Immersion Electric Heater Coil. Cat No: TMSS-18E4XX. P/N: 155-500771-522. (18) Stainless steel tubes: 48 in. L. Electrical requirements: 480 V, 3 phase. (3) Circuits. Terminal enclosure: moisture resistant, explosion resistant. Flange: 14 in diameter, cold end: 6 in. diameter. Overall dimensions: 66 in. L x 15 in. diameter.
|
|
|
|
Insulated Tube |
| Mfg: |
Model: |
| Stock No. SSPN281.4a |
Serial: |
| (4) Insulated Tube. Stainless steel construction. Tube dimensions: 4 in. dia. x 54 in. L. Inlets: (1) 1/2 in. dia. NPT (female), (1) 4 in. dia. I-line fitting (female). Outlets: (1) 4 in. dia. I-line fitting (male). Overall dimensions: 55 in. L x 6 in. W x 11 in. H.
|
|
|
|
Barrel Heating Coils |
| Mfg: |
Model: |
| Stock No. SGMT200.a |
Serial: |
| (3) Barrel Heating Coils. Stainless steel construction. Holding capacity: 1/2 gallon (each). Coil tube diameter: 3/4 in. Maximum spiral outer diameter: 16 in. (2) Flexible stainless steel braided hoses: 56 in. L. Inlet/outlet: 3/4 in. threaded (female). Overall dimensions: 17 in. diameter x 50 in. H.
|
|
|
|
Holding Tube |
| Mfg: |
Model: |
| Stock No. GOB4851.3 |
Serial: |
| 3 inch Holding Tube and stand has five 3 inch tubes - 74 inch long. All of the 90¡ã elbows and clamps are missing. Stainless steel stand has adjustable feet and flow diversion valve bracket.
|
|
|
|
APV Hydraulic Exchanger |
| Mfg: |
Model: |
| Stock No. LOL62.5 |
Serial: |
| APV hydraulic exchanger.
|
|
|
|
Anderson Chart Decoder |
| Mfg: Anderson |
Model:AV-9000 |
| Stock No. HDCD092.3 |
Serial: |
| Anderson Chart Decoder. Model AV-9000.
|
|
|
|
Honeywell Chart Recorder |
| Mfg: |
Model: |
| Stock No. 8.JMB50a.2 |
Serial: |
| Honeywell Chart Recorder New.
|
|
|
|
HTST Chart Recorder |
| Mfg: |
Model: |
| Stock No. GM-9007.45 |
Serial: |
| HTST chart recorder.
|
|
|
|
HTST Chart Recorder |
| Mfg: |
Model: |
| Stock No. GM-782.7a |
Serial: |
| HTST chart recorder.
|
|
|
|
HTST Chart Recorder |
| Mfg: |
Model: |
| Stock No. 15.GM-782.7a |
Serial: |
| HTST chart recorder.
|
|
|
|
Chester-Jensen Plate Cooler |
| Mfg: Chester-Jensen |
Model: |
| Stock No. pGKD154.25 |
Serial: |
| Chester-Jensen Plate Cooler.
|
|
|
|
SOLD Chester Jensen Falling Water Ice Chiller SOLD |
| Mfg: Chester-Jensen |
Model: |
| Stock No. RCCB400. |
Serial: |
| Chester Jensen Falling Water Ice Chiller. (8) 60 in. L x 45-1/2 in. H. Chester Jensen Plates with 36 coils. Nat’l Bd: 4044, 4045, 4049, 4052, 4070, 4278, 4311. C-J No. 281151, 28152, 28156, 28204, 28208, 28262, 28508, 28582 Rad. Flat, 200 psi @ 200 °F, 8-shell @ .045 thk., head @ 0.45 thk., 120 V. Inlets: (1) 3 in. dia. port, (8) 1 in. dia. port (plates), (1) 2 in. dia. ACME. Outlets: (1) 3 in. dia. port, (8) 1 in. dia. port (plates), (1) 3 in. dia. port with globe valve. Overall dimensions: 106 in. L x 48 in. W x 81 in. H.
|
|
|
|
SOLD Stainless Steel Falling Film Plate Chiller SOLD |
| Mfg: |
Model: |
| Stock No. KAAM0396.45 |
Serial: |
| Stainless Steel Falling Film Plate Chiller. (12) 5 ft. W x 3 ft. 7 ft. H stainless steel sections. Number of corrugations: 36. Reservoir capacity: 250 gal. Inlets: (1) 2 in. dia. S-line fitting (water/solution), (12) 1-1/2 in. dia. flanged ports (media). Inlets: (12) 1-1/2 in. dia. flanged ports (media), (1) 4 in. dia. S-line fitting (water/solution). Overall dimensions: 6 ft. 4 in. L x 5 ft. 4 in. W x 7 ft. H.
|
|
|
|
SOLD 1998 Chester Jensen Ammonia Plate Chiller-20 Ton SOLD |
| Mfg: Chester Jensen |
Model:XB-4-OT-2-32 |
| Stock No. CAJB001.30 |
Serial: 9863-P |
| 1998 Chester Jensen Ammonia Plate Chiller- 20 Ton. Model: XB-4-OT-2-32. S/N: 9863-P. Flow Rate: 15.4 gpm through a delta T of approximately 15.6 °F. Tank capacity: 240 gal. (2) 62 in L x 46 in. H plates with (32) corrugations. (2) FOL-CONtractor. Design pressure: 5/8 mrp. Inlets: (1) 2 in. dia. S-Line, (2) 1-1/2 in. dia. port. Outlets: (1) 2-1/2 in. dia. (2) 1-1/2 in. dia. port. Overall dimensions: 86-1/2 in. L x 32-1/2 in. W x 102 in. H. Can be used for Ammonia or Freon.(ACN220).
|
|
|
|
SOLD Chester Jensen Falling Film Plate Chiller SOLD |
| Mfg: Chester Jensen |
Model:B-4-OT-4-36 |
| Stock No. KAAM0397.32 |
Serial: 7927 |
| Chester Jensen Falling Film Plate Chiller. Model: B-4-OT-4-36. S/N: 7927. Capacity: 90 nominal tons. Refrigerant: flooded ammonia. (4) 5 ft. W x 3 ft. 7 ft. H stainless steel sections. Number of corrugations: 36. MAWP: 200 psi @ 200 °F. Radius: flat. Shell thickness: 0.045 in. Reservoir capacity: 125 gal. Inlets: (1) 2 in. dia. port (water/solution), (1) 3 in. dia. refrigerant infeed port. Outlets: (1) 2 in. dia. NPT discharge, (1) 2 in. dia. NPT overflow, (1) 3 in. dia. refrigerant suction port. Overall dimensions: 7 ft. 6 in. L x 2 ft. 8 in. W x 6 ft. 10 in. H.(ACN310–79).
|
|
|
| Heat Exchangers > Heat Exchanger Misc |
|
|
