Plate Heat Exchanger, Used Plate Heat Exchangers, Heat Exchanger, Heat Exchangers, Used Heat Exchanger, Used Heat Exchangers
Heat Exchanger by Type
• Shell and Tube Heat Exchanger
• Plate Heat Exchanger
• Heat Exchanger Plate
• Ice Cream Equipment
• Spiral Heat Exchanger
• Double Tube Heat Exchanger
• Triple Tube Heat Exchanger
• HTST Heat Exchanger
• Porcupine Dryer
• Blancher
• Surface Scrape Heat Exchanger
• Flavorizer / Flash Chamber
• UHT Heat Exchanger
• Heat Exchanger Misc
About Us
• Used Heat Exchanger Home
• Contact Used Heat Exchanger
• Useful Links
Heat Exchanger > Plate Heat Exchanger

Plate Heat Exchanger
Plate Heat Exchanger
 Crepaco Plate Heat Exchanger
Mfg: Crepaco Model:CR5
Stock No. HDAF957.62 Serial: C-1163
Crepaco Plate Heat Exchanger. Model: CR5. S/N: C-1163. Number of stainless steel plates: 214. Heat transfer surface area: approx. 1337 sq. ft. Fixed end ports: (4) 4 in. dia. S-Line (4) Divider Inlets: (8) 2 in dia. NPT fittings (male). Outlets: (7) 2 in. dia. NPT fittings (male). Terminal ports: (4) 4 in. dia. S-Line. Vickers Vane Pump, Reliance Motor, 5 hp, 1730 rpm, 230/460 V, 14/7 amps, 60 Hz, 3 phase. Inlet/outlets: 1 in. dia. NPT (female) port. Overall dimensions: 11 ft. 8 in. L x 36 in. W x 8 ft. 6-1/2 in. H.
Plate Heat Exchanger
 Alfa Laval Plate Heat Exchanger
Mfg: Alfa Laval Model:H10-FMC
Stock No. HDAF531.79 Serial: 4239
Alfa Laval Plate Heat Exchanger. Model: H10-FMC. Current Model: Tetra-Pack C10-SH. S/N: 4239. Stainless steel plates: (255). Heat transfer surface area: approx. 1723 sq. ft. Maximum working pressure: 145 psig. Maximum working temperature: 285 °F. Fixed end ports: (2) 3 in. dia. ACME inlets. Dividers Inlets: (2) 3 in dia. ACME. Outlets: (3) 3 in. dia. ACME, (1) 2-1/2 in. dia. ACME. Terminal ports: (2) 4 in. dia. ACME. Overall dimensions: 11 ft. 3 in. L x 34 in. W x 97 in. H. (ACN830).
Plate Heat Exchanger
 Alfa Laval Plate Heat Exchanger
Mfg: Alfa Laval Model:H10-FMC (Tetra Pak C10-SH)
Stock No. HDAF532.42a Serial: 4237
Alfa Laval Plate Heat Exchanger. Model: H10-FMC. Current Model: Tetra-Pak C10-SH. S/N: 4237. Stainless steel plates: (110). Heat transfer surface area: approx. 675 sq. ft. Maximum working pressure: 145 psig. Maximum working temperature: 285 °F. Fixed end ports: (1) 3 in. dia. ACME inlet, (1) 3 in. dia. ACME outlet. Divider: (1) 3 in. dia. ACME inlet, (2) 3 in. dia. ACME outlet. Movable end ports: (1) 3 in. dia. ACME inlet, (1) 3 in. dia. ACME outlet. Overall dimensions: 9 ft. L x 34-1/2 in. W x 8 ft. 4 in. H. (ACN620).
Plate Heat Exchanger
 1992 Paul Mueller Accu-Therm Plate Heat Exchanger
Mfg: Paul Mueller Model:AT161B-10 S/S
Stock No. 75.JMB246.25 Serial: 101176-1
1992 Paul Mueller Accu-Therm Plate Heat Exchanger. Model: AT161B-10 S/S, S/N: 101176-1. 316L stainless steel. MAWP: 75 psi @ 200 °F; steam. Plates: 104. Plate pack dimensions: 32 in. L x 18 1/2 in. W x 56 1/2 in. H. (8) 3 in. s-line outlets. Overall dimensions: 72 in. L x 33 1/2 in. W x 84 in. H.
Plate Heat Exchanger
 1998 FES Plate Heat Exchanger
Mfg: FES Model:8WP-B1-1
Stock No. BIIR7005. Serial: 34801
1998 FES Plate Heat Exchanger. Model: 8WP-B1-1. S/N: 34801. Nat'l Bd: 2296. Nominal tonnage rating: 220. Single pass unit with 27 double stainless steel plates, and (1) stainless steel plate at the movable side. Approx. 303 sq. ft. Hot side MAWP @ 185 °F: 150 psig. Cold side MAWP @ 185 °F: 250 psig. Hot side MDMT @ 150 psi: -20 °F. Cold side MDMT @ 250 psi: -20 °F. Inlets: (1) 8 in. dia. product cold side flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in., (1) 8 in. dia. hot water flange with (8) 3/4 in. dia. thru holes at a center-to-center distance Heating surface area: 4-1/2 in. Outlets: (1) 8 in. dia. product hot side flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in., (1) 8 in. dia. cold water flange with (8) 3/4 in. dia. thru holes at a center-to-center distance of 4-1/2 in. Overall dimensions: 5 ft. 2 in. L x 2 ft. 8 in. W x 7 ft. 8 in. H.(ACN211).
Plate Heat Exchanger
 1998 APV/FES Plate Heat Exchanger
Mfg: APV/FES Model:8WP-C2-1
Stock No. ASAC007. Serial: 339521
1998 APV/FES Plate Heat Exchanger. Model: 8WP-C2-1. S/N: 339521. Nat'l Bd: 1711. Dwg: 4339520001. Number of plates: 172, (86 plate packs). Heat transfer surface area: approx. 2,408 sq. ft. Plate pack dimensions (max/min): 23.97/23.63 in. Design pressure hot/cold side: 150/300 psig. Test pressure hot/cold side: 225/450 psig. Design temperature max/min: 185/-20 °F. Chamber 1 MAWP: 150 psi @ 185 °F. Chamber 2 MAWP: 300 psi @ 185 °F. Chamber 1 MDMT: -20 °F @ 150 psi. Chamber 2 MDMT: -20 °F @ 300 psi. This unit is capable of cooling 600 GPM of 35% Propylene Glycol from +65 F to +35F ( about 700+ TR capacity), using flooded NH3 @ about +28F suction temp. Inlets: (1) 8 in. dia. port (product), (1) 2 in. dia. port (media). Outlets: (1) 8 in. dia. port (product), (1) 6 in. dia. port (media). Overall dimensions: 9 ft. L x 3 ft. W x 9 ft. H. (ACN495).
Plate Heat Exchanger
 Chester Jensen Plate Heat Exchanger
Mfg: Chester Jensen Model:63 HMC
Stock No. GOB1251.7 Serial: 11722304
Chester Jensen Plate Heat Exchanger. Model: 63 HMC, S/N: 11722304. Design pressure max: 100 psig. 316 Stainless steel plates: (170). Section 1: (108) plates; Section 2: (62) plates. Heat transfer surface area: 493 sq. ft. Fixed end ports: (4) 2-1/2 in. Movable end ports: (4) 2-1/2 in. Divider ports: (3) 2 in. Overall dimensions: 90 in. L x 25 in. W x 70 in. H. This unit came from Middlefield Cheese in Ohio. Running 7000 H/W of cheese milk 40 ° - 113 °F; 113° - 165 °F and 165 ° - 192 °F.
Plate Heat Exchanger
 Crepaco Plate Heat Exchanger
Mfg: Crepco Model:CR5
Stock No. RWDG280.11a Serial: C-7575
Crepaco Plate Heat Exchanger. Model: CR5. S/N: C-7575. (37) Stainless steel plates. Heating surface approx: 208.63 sq. ft. Plate pack: 9 in. L. Jayco Inc. pressure relief valve, model: TH 35, size: 2, capacity: 1660 lbs. Inlets/outlets: 4 in. 'S' line reducer to a 1-1/2 in. 'S' line. Water inlet: 2 in. with a 6 in. flange diameter and 4 attachment holes at a center to center distance of 3-1/2 in., 3-1/4 in. threaded female (steam), 4 in. 'S' line reducer to a 2 in. 'S' line. Overall dimensions: 73 in. L x 39 in. W x 84 in. H.
Plate Heat Exchanger
 APV Plate Heat Exchanger
Mfg: APV Model:CR5 HYDRAULIC
Stock No. 450.HDVI184.181a Serial: 22839
APV Plate Heat Exchanger. Model: CR5 HYDRAULIC. S/N: 22839. (2) dividers. (3) sections. Number of plates: (49) header, (101) middle, (73) floater. Total : 223. Heat Transfer Surface Area: approx. 1200 sq.ft. Fixed end ports: (4) 3 in. dia. Q-line fittings. Divider Inlets: (3) 2-1/2 in. dia. Q-line fittings, (1) 2-1/2 in. dia. S-line fitting. Outlets: (2) 2-1/2 in. dia. Q-line fittings, (1) 2-1/2 in. dia. S-line fitting. Terminal Ports: (4) 3 in. dia. Q-line fittings. Overall dimensions: 11 ft. L x 3 ft. W x 8 ft. 5 in. H.
Plate Heat Exchanger
 APV HTST Skid with Titanium Plates
Mfg: APV Model:SR-35
Stock No. BIIR05. Serial: 16032
APV HTST Skid with Titanium Plates. Model: SR-35. S/N: 16032. APV Heat Exchanger: (55) Titanium plates. (2) divider plates. Heat transfer surface area: 235.27 (approx.). Holding tube diameter: 2 in. Capacity: 2-1/2 gal. Heat transfer surface area: 8 sq. ft. (approx.). Carver Centrifugal Pump, Type: 2.5x2x7LA-33D, S/N: 82861, 3450 rpm (final), impeller diameter: 5-1/2 in. Baldor Industrial Motor, 5 hp, 3450 rpm, 208-230/460 V, 13.2-12/6 amps, 60 Hz, 3 phase. Inlets: (1) 3 in. dia. S-line fitting, (1) 3 in. dia. with a 7 in. dia. flange and (4) 3/4 in. dia. attachment holes at a center-to-center distance of 6 in. Outlets: (1) 3 in. dia. S-line fitting, (2) 3 in. dia. with a 7 in. dia. flange and (4) 3/4 in. dia. attachment holes at a center-to-center distance of 6 in. Overall dimensions: 9 ft. 10 in. L x 68 in. W x 95 in. H.
Plate Heat Exchanger
 APV Paraflow Plate Heat Exchanger
Mfg: APV Model:HMBM
Stock No. OI154. Serial: M/C 2533
APV Paraflow Plate Heat Exchanger. Model: HMBM, S/N: M/C 2533, Stainless steel plates: Qty (114), Heat transfer surface area: Approx. 312 sq. ft., Fixed end ports: (4) 2 1/2 in. Movable end ports: (4) 2 1/2 in. Divider 1 ports: (1) 2 in., (1) 1 1/2. Overall dimensions: 95 in. L x 28 in. W x 71 in. H.
Plate Heat Exchanger
 Kusel Plate Heat Exchanger
Mfg: Kusel Model:
Stock No. 30.SWC265a.40 Serial:
Kusel Plate Heat Exchanger. Number of stainless steel plates: 90. Heating surface area: approx. 208.125 sq. ft. Inlets: (1) 2 in. dia. threaded fitting (product), (1) 2 in. dia. threaded fitting (hot water). Outlets: (1) 2 in. dia. threaded fitting (product), (1) 2 in. dia. threaded fitting (cold water). Overall dimensions: 72 in. L x 30 in. W x 62-1/2 in. H.
Plate Heat Exchanger
 1994 Paul Mueller Accu-Therm Plate Heat Exchanger
Mfg: Paul Mueller Model:AT16161FFB-10
Stock No. JMB245bb.30 Serial: 101176-4
1994 Paul Mueller Accu-Therm Plate Heat Exchanger. Model: AT16161FFB-10, S/N: 101176-4. 316L stainless steel. MAWP: 75 psi @ 150 °F. Plates: 118. Glycol chilled. Plate pack dimensions: 36.47 in. L x 18.5 in. W x 56 in. H. Outlets: (8) 3 in. s-line. Overall dimensions: 92 in. L x 33-1/2 in. W x 86 in. H.
Plate Heat Exchanger
 APV R57 Plate Heat Exchanger
Mfg: APV Crepaco Model:R57
Stock No. SAF162a.8 Serial: 25590
APV Plate Heat Exchanger. Model: R57, S/N: 25590. Stainless steel plates: (167). Section 1: (37) plates, Section 2: (113) plates, Section 3: (17) plates. Fixed end ports: (3) 4 in. Movable end ports: (3) 4-1/2 in. Divider 1 ports: (2) 2-1/2 in., (1) 3 in. Divider 2 ports: (1) 2 in., (1) 2-1/2 in. Overall dimensions: 90 in. L x 25 in. W x 70 in. H.
Plate Heat Exchanger
 1994 APV Plate Heat Exchanger
Mfg: APV Model:SR95
Stock No. DPPX41801. Serial: 28758-1
1994 APV Plate Heat Exchanger. Model: SR95. S/N: 28758-1. Nat’l Bd: 5948. Nominal flow capacity: 1650 gpm. Nominal heat transfer capacity: 14,202,787.5 Btu/hr. Number of plates: 292. Number of dividers: 1. Heat transfer surface area: approx. 3,171 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 10 in. L x 2 ft. 9-1/2 in. W x 7 ft. 2 in. H.(ACN900).
Plate Heat Exchanger
 1992 APV Plate Heat Exchanger
Mfg: APV Model:SR950
Stock No. DPPX41802. Serial: 26337-2
1992 APV Plate Heat Exchanger. Model: SR950. S/N: 26337-2. Nat’l Bd: 4998. Nominal flow capacity: 1400 gpm. Nominal heat transfer capacity: 8,732,500 Btu/hr. Number of plates: 294. Number of dividers: 1. Heat transfer surface area: approx. 3, 075 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 8-1/2 in. L x 2 ft. 9-1/2 in. W x 7 ft. H. (ACN900).
Plate Heat Exchanger
 1992 APV Plate Heat Exchanger
Mfg: APV Model:SR950
Stock No. DPPX41803. Serial: 26337-1
1992 APV Plate Heat Exchanger. Model: SR950. S/N: 26337-1. Nat’l Bd: 4997. Nominal flow capacity: 1400 gpm. Nominal heat transfer capacity: 8,732,500 Btu/hr. Number of plates: 290. Number of dividers: 1. Heat transfer surface area: approx. 3,034 sq. ft. MAWP: 150 psig @ 275 °F. MDMT: 20 °F @ 150 psig. Inlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Outlets: (1) 8 in. dia. flanged port (product), (1) 8 in. dia. flanged port (media). Overall dimensions: 12 ft. 8-1/2 in. L x 2 ft. 9-1/2 in. W x 7 ft. H. (ACN900).
Plate Heat Exchanger
 1994 API Schmidt – Bretten Plate Heat Exchanger
Mfg: API Schmidt – Bretten Model:SIGMA 27H-150
Stock No. CSWB363.25a Serial: 24394HX-02
1994 API Schmidt - Bretten Plate Heat Exchanger. Model: SIGMA 27H-150. S/N: 24394HX-02. Plate Material: Titanium. Number of Plates: 192. Gasket material: Nitrile. MAWP: 150 psig @ 285 °F. Test press: 225 psig. Approx. Number of sections: 2. Number of dividers: 1. Total heat transfer surface area: approx. 550 sq. ft. Inlets/outlets: (8) 2 ½ in. dia. S-line fittings. Overall dimensions: 6 ft. 4 in. L x 2 ft. 1 in. W x 4 ft. 6 in. H. (ACN487).
Plate Heat Exchanger
 2 Effect APV Falling Film Plate Evaporator Effect with TVR
Mfg: APV Model:FFPE & R-86
Stock No. ENDX672.8a Serial: 16283
APV 2 effect evaporator with TVR The 1st effect is an APV Falling Film Plate pack. It is a painted carbon steel frame with 316 SS plates and product contact surfaces. The 2nd effect is an APV R86 Plate. . It is a painted carbon steel frame with 316 SS plates and product contact surfaces. This system is equipped with a legal Pasteurizer for a preheating system and a Thermocompressor that increases the overall steam efficiency to 3 to 1. It is equipped with a shell and tube surface condenser and a 2 stage flash cooling system This system was originally designed to concentrate dairy products to high solids. This system will be ideal for heat sensitive food grade products going to high concentrations
Plate Heat Exchanger
 APV Finisher Model R86
Mfg: APV Model:R86
Stock No. ENDX673.8a Serial: 16283
APV Finisher. Model R86. S/N 16283. 6 in. inlet/outlet. Capacity Size 21 Sq. ft.
Plate Heat Exchanger
 APV Plate Heat Exchanger/Evaporator Model FFPE
Mfg: APV Model:FFPE
Stock No. ENDX674.8a Serial: 256
APV Plate Heat Exchanger/Evaporator. Model FFPE. S/N 256. Capacity Size 48 sq. ft.
Plate Heat Exchanger
 APV Paraflow HX Plate Heat Exchanger Model HX
Mfg: APV Model:HX
Stock No. ENDX750.3a Serial: MC 988
APV Paraflow Stainless Steel Plate Heat Exchanger. Model 988, S/N 5510-484. End Top Inlets/Outlets 2 in., 2 in., 2 in., 2 in. Side Top Inlets/Outlets 2 in., 2 in. End Bottom Inlets/Outlets 2 in., 2 in., 2 in. 2 in. Overall Dimensions 73 in. L x 25 in. W x 61 in. H.
Plate Heat Exchanger
 APV Paraflow Plate Heat Exchanger
Mfg: APV Model:HMB
Stock No. OI153. Serial: M/C 3608
APV Paraflow Plate Heat Exchanger. Model: HMB, S/N: M/C 3608. 3-A sanitary. Fixed end ports: (4) 2-1/2 in. Movable end ports: (4) 2-1/2 in. Overall dimensions: 104 in. L x 28 in. W x 71 in. H.
Plate Heat Exchanger
 APV Paraflow Plate Heat Exchanger
Mfg: APV Model:HX
Stock No. OI156. Serial: M/C 2569
APV Paraflow Plate Heat Exchanger. Model: HX, S/N: M/C 2569. Rated 3A sanitary. Design pressure: 100 psig. Test pressure: 150 psig. Fixed end ports: (4) 2 in. Movable end ports: (4) 2 in. Terminal 1 ports: (4) 2 in., Terminal 2 ports: (1) 2 in., Terminal 3 ports: (2) 2 in., Terminal 4 ports: (4) 2 in. Overall dimensions: 88 in. L x 24 in. W x 60 in. H.
Plate Heat Exchanger
 1991 Mueller Accu-Therm Plate Heat Exchanger
Mfg: Mueller Model:AT410 F-20
Stock No. SSLP101.9 Serial: 101036-2
1991 Mueller Accu-Therm Plate Heat Exchanger. Model: AT40 F-20. S/N: 101036-2. Nat'l Bd: 18942. (96) 316 Stainless steel plates. Heating surface area: approx. 400 sq. ft. Plate pack max/min lengths: 16.89/16.32 in. MAWP: 100 psi @ 150 °F. MDMT: 32 °F @ 100 psi. Inlets: (1) 4 in. dia. port (hot), (1) 4 in. dia. port (cold). Outlets: (1) 4 in. dia. port (hot), (1) 4 in. dia. port (cold). The Accu-Therm is a compact heat exchanger consisting of embossed heat transfer plates with perimeter gaskets to contain pressure and control the flow of each medium. Accu-Therm plates ensure high thermal efficiency, uniform fluid distribution, minimal fouling, and suitability for full differential pressure rating. Single-pass arrangement over an F-frame. Overall dimensions: 54 in. L x 21 in. W x 82 in. H.
Plate Heat Exchanger
 APV Plate Heat Exchanger
Mfg: APV Model:R-51
Stock No. 120.ME88.20 Serial: 24447
APV Plate Heat Exchanger. Model: R51. S/N and W.O: 24447. Number of dividers: 2. Inlets/outlets: (11) 3 in. dia. S-line fittings. Overall dimensions: 8 ft. 9 in. L x 2 ft. 10 in. W x 7 ft. 10 in. H. Parker Hydraulic Torque Link, S/N: 51758, inlets/outlets: (4) 1/2 in. dia. NPT fittings. Overall dimensions: 2 ft. 5 in. L x 1 ft. 9 in. W x 6 ft. 9 in. H. RTD
Plate Heat Exchanger
 Munters Stainless Steel Heat Exchanger
Mfg: Munters Model:
Stock No. SHCA170.4a Serial:
Munters Stainless Steel Heat Exchanger. Baldor Explosion Proof Motor, 3 hp, 3450 rpm, 208-230/460 V, 8.2-7.8/3.9 amps, 60 Hz, 3 phase. Inlets: (1) 6 in. dia. infeed. Outlets: (1) 6 in. dia. flanged discharge. Overall dimensions: 78 in. L x 32-1/2 in. W x 64 in. H.
Plate Heat Exchanger
 1998 Xchanger Inc. Plate Fin Air/Gas Heat Exchanger
Mfg: Xchanger Inc. Model:C-200
Stock No. SHCA177.4a Serial: 0498-B5758
1998 Xchanger Inc. Plate Fin Air/Gas Heat Exchanger. Model: C-200. S/N: 0498-B5758. Material of construction: 304 stainless steel, core stamped: ASMU UM. Process media flow rate: 1555.6 SCFM, operating pressure: 14.6 PSIA, design pressure: 15 PSIG, Temperature in: 10°F, temperature out: 355°F. Service media flow rate: 695.1 lb/hr. MAWP: 250 psig @ 400 °F. MDMT: 250 psig @ -40 °F. C-Series heat exchangers heat and cool low pressure gas streams. Easily removable central core. Function: heat, cool, dehumidify. Service fluid: water, refrigerant, steam, etc. Inlets: (1) 1 in. dia. FNPT, (1) 9 in. dia. flanged port. Outlets: (1) 1-1/4 in. dia port, (1) 9 in. dia. flanged port. Overall dimensions: 55 in. L x 44 in. W x 44 in. H.(ACN20a).
Plate Heat Exchanger
 1997 Xchanger Inc. C-Series Heat Exchanger
Mfg: Xchanger Inc. Model:C-175
Stock No. SHCA294.5a Serial: 0997-B5469-1
1997 Xchanger Inc. C-Series Plate Fin Heat Exchanger. Model: C-175. S/N: 0997-B5469-1. P/N: 27748. Process media flow rate: 520 SCFM, temperature in: 265 °F, temperature out: 110 °F, inlet pressure: 1.96 in. Hg., velocity: 244.5 SCFM. Service media flow rate: 7 gpm, temperature in: 85 °F, temperature out: 110 °F, velocity: 120 SCFM. Functions: heat, cool, dehumidify. Service fluids: water, refrigerant, steam, etc. C Series heat exchangers heat and cool low pressure gas streams. The modular C Series design allows a standard unit to give a custom fit. Inlets: (1) 1 in. dia. copper tube (media), (1) 13 in. dia. stream port with a 19 in. flange. Outlets: (1) 1 in. dia. copper tube (media), (1) 13 in. dia. stream port with a 19 in. flange. Overall dimensions: 3 ft. 10-1/2 in. L x 3 ft. W x 6 ft. 7in. H.(ACN65).
Plate Heat Exchanger
 1997 Xchanger Inc. C Series Plate Fin Heat Exchanger
Mfg: Xchanger Inc. Model:C-175
Stock No. SHCA294B. Serial: 0997-B5469-2
1997 Xchanger Inc. C Series Plate Fin Heat Exchanger. Model C-175. S/N: 0997-B5469-2. Functions: heat, cool, dehumidify. Pressure: typical 15, max. 50. Contact metals: steel, copper, aluminum. Water, refrigerant and steam are the service fluids. C Series heat exchangers heat and cool low pressure gas streams. The modular C Series design allows a standard unit to give a custom fit. Inlets: 9 in. dia. air flange, 1 in. dia. copper line, Outlets: 11 in. dia. air flange, 1 in. dia. copper line. Mounted on a steel frame. Overall dimensions: 46 ½ in. L x 35 in. W x 60 in. H. (ACN62a).
Plate Heat Exchanger
 1997 Xchanger Inc. C-Series Heat Exchanger
Mfg: Xchanger Inc. Model:C-200
Stock No. SHCA294C. Serial: 0097-B5469-3
1997 Xchanger C-Series Heat Exchanger. Model: C-200. S/N: 0097-B5469-3. Horizontal flow. Heat transfer rate: 143,134 Btuh. Process media side - volumetric flow rate: 1,104 scfm, temperature in: 230 °F, temperature out: 110 °F, inlet pressure: 19.6 in. Hg., velocity: 397.4 scfm. Service media side: volumetric flow rate: 11.6 gpm, temperature in: 85 °F, temperature out: 110 °F, velocity: 168 scfm. Tube mat'l: copper. Fin mat'l: aluminum. Housing mat'l: carbon steel (primed). Casing mat'l: galvanized steel. Functions: heat, cool, dehumidify. Pressure: typical 15, max. 50. Contact metals: steel, copper, aluminum. Water, refrigerant and steam are the service fluids. C Series heat exchangers heat and cool low pressure gas streams. The modular C Series design allows a standard unit to give a custom fit. Inlets: (1) 9 in. dia. stream port, (1) 1 in. dia. copper line (media). Outlets: (1) 11 in. dia. stream port, (1) 1 in. dia. copper line (media). Overall dimensions: 46-1/2 in. L x 35 in. W x 61 in. H. (ACN63).
Plate Heat Exchanger
 2001 APV Plate Heat Exchanger
Mfg: APV Model:SR6GL
Stock No. BIIR8010. Serial: 29441
2001 APV Plate Heat Exchanger. Model: SR6GL. S/N: 29441. Dwg: 4.29441.001 F. Number of stainless steel plates: 18. Heat transfer surface area: approx.106 sq. ft. MAWP: 250 psig at 250 °F. MDMT: 0 °F at 250 psig. Test pressure: 375 psig. Maximum/minimum plate pack dimensions: 12-1/2 in. and 12-1/4 in. Fixed end ports: (3) 4 in. dia. flanged ports. Movable end ports: (1) 4 in. flanged port. Overall dimensions: 3 ft. 11 in. L x 2 ft. 4 in. W x 6 ft. H.
Plate Heat Exchanger
 APV Plate Heat Exchanger
Mfg: APV Model:
Stock No. CCFP510. Serial: 465
APV Plate Heat Exchanger. S/N 465. Plates: (29). Heat transfer surface area: Approx 52 sq. ft. Section 1: (15) plates; Section 2: (14) plates. Fixed end ports: (2) 2-1/2 in, (1) 2 in. Movable end ports: (1) 2 in, (1) 2-1/2 in. Divider ports: (3) 2 in. Overall dimensions: 93 in. L x 32 in. W x 50 in. H.
Plate Heat Exchanger
 Stainless Steel Heat Exchanger.
Mfg: Not Specified Model:
Stock No. SHCA1175.1 Serial:
Stainless Steel Heat Exchanger. (2) 25 in. L x 10 in. W finned inserts. Low pressure drops-ideal for blowers. Inlets: (1) 3/4 in. dia port, (1) 12 in. dia. infeed. Outlets: (1) 3/4 in. dia port, (1) 12 in. L x 10 in. W discharge chute. Overall dimensions: 38 in. L x 31-1/2 in. W x 78 in. H.
Plate Heat Exchanger
 Tranter Inc. Superchanger Plate Heat Exchanger
Mfg: Tranter Inc. Model:S-3-HP-154
Stock No. SHCA1181.3a Serial: P-30014-H. S.O: 81343
Tranter Inc. Superchanger Plate Heat Exchanger. Model: S-3-HP-154. S/N: P-30014-H. S.O: 81343. Stainless steel plates: 52. Heat transfer surface area: 513.7 sq. ft. MAWP: 100 psi. Maximum temperature: 250 °F, Test Pressure 150 PSIG. Plate pack dimensions min/max: 28 in. and 72 in. Inlets: (2) 4-bolt, 2 in. dia. flange. Outlets: (2) 4-bolt, 2 in. dia. flange. Overall dimensions: 98 in. L x 23 in. W x 66 in. H.
Plate Heat Exchanger
 APV Paraflow Plate Heat Exchanger
Mfg: APV Model:HX
Stock No. EPBD001. Serial: MC16131528
APV Paraflow Plate Heat Exchanger. Model: HX. S/N: MC16131528. Stainless steel construction. (54) Stainless Steel plates. Two pass system. Heat transfer-surface area: approx. 103.59 sq. ft. Product Inlet/outlet: 2 in. threaded (male), steam inlet/outlet: 2 in. threaded (male). Overall dimensions: 80 in. L x 21 in. W x 61 in. H.
Plate Heat Exchanger
 APV Crepaco Model R405-S Plate Heat Exchanger - Titanium Plates
Mfg: APV Crepaco Model:R405-S
Stock No. 35.184 Serial: 18279
APV Crepaco Plate Heat Exchanger - Titanium Plates. Model: R405-S. S/N 18279. Number of stainless steel plates: 85. Plate dimensions: 3 ft. 8 in. H. x 1 ft. 5-1/2 in. W. Heat transfer area: approx. 478 sq. ft. Inlets: (2) 4 in. ID dia. product inlet, (2) 4 in. ID dia. steam inlet. Outlets: (2) 4 in. ID dia. product, (2) 4 in. ID dia. steam, all with 8 bolt flange connections. As titanium is resistant to salt and brackish water and corrosion that can be caused by many salt solutions as well as those including chlorides, bromides and iodides, the APV R405-S is ideal for most marine applications or where sea water is used as cooling water for long periods of time, thus reducing costs and improving investment returns. Overall dimensions: 5 ft. 1 in. L x 2 ft.10 in. W x 5 ft. 3 in. H.
Plate Heat Exchanger
 1997 Super Radiator Coils / C.E. Rogers Stainless Steel Plate / Fin Heat Exchanger
Mfg: Super Radiator Coils / C.E. Rogers Model:
Stock No. HDDF148BB. Serial: M61294-1-001
1997 Super Radiator Coils / C.E. Rogers Stainless Steel Plate / Fin Heat Exchanger. 304L Stainless Steel Tubes and Fins. Super Radiator Coils Steam Coil. S/N: M61294-1-001. (8) ½ in. dia. x 24 in. L 304L Stainless Steel Tubes. Heat Transfer Surface Area: 2.1sq. ft. C.E. Rogers Cold Air Duct and filter chamber. (160) ½ in. dia. x 24 in. L 304L Stainless Steel Tubes. Heat transfer surface area: 41.87 ft. sq. Inlets: (5) 2 in. dia. S-line, (1) 9 in. dia. port. Outlets: (4) 2 in. dia. ports. Overall dimensions: 12 ft. 3 in. L x 4 ft. 9 in. W x 6 ft. H. (ACN270).
Plate Heat Exchanger
 APV Plate Heat Exchanger
Mfg: APV Model:SR35-S
Stock No. HDRG095.8a Serial: 14722
APV Plate Heat Exchanger. Model: SR35-S. S/N: 14722. (2) Dividers. (3) Sections. Number of plates: 40 (header), 57 (middle), 17 (floater). Total: 114. Heat Transfer Surface Area: approx. 498 sq. ft. Fixed end ports: (4) 3 in. dia. ACME fittings. Divider Inlets: (3) 3 in. dia. ACME fittings. Outlets: (3) 3 in. dia. ACME fittings, (1) 2 in. dia. ACME fitting. Terminal ports: (4) 3 in. dia. ACME fittings. Overall dimensions: 8 ft. L x 2 ft. 8 in. W x 6 ft. 4 in. H.
Plate Heat Exchanger
 1995 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:CT170-MP/18
Stock No. WJHM001. Serial: 30101-13889
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13889. Number of plates: 18. Heat transfer surface area: Approx: 50 sq.ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
Plate Heat Exchanger
 1995 Cetetherm Plate Heat Exchanger
Mfg: Cetetherm Model:CT170-MP/18
Stock No. WJHM002. Serial: 30101-13888
1995 Cetetherm Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13888. Number of plates: 18. Heat transfer surface area: Approx: 50 sq. ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
Plate Heat Exchanger
 1995 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:CT170-MP/18
Stock No. WJHM003. Serial: 30101-13887
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT170-MP/18. S/N: 30101-13887. Number of plates: 18. Heat transfer surface area: Approx: 50 sq.ft. MAWP: 145 psi @ 185 °F. Volume: 4-1/2 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
Plate Heat Exchanger
 1995 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:CT160-MP/38
Stock No. WJHM006. Serial: 30101-13883
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT160-MP/38. S/N: 30101-13883. Number of plates: 38. Heat transfer surface area: Approx: 105 sq.ft. MAWP: 145 psi @ 140 °F. Volume: 6 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
Plate Heat Exchanger
 1995 Cetetherm Plate Heat Exchanger
Mfg: Cetetherm Model:CT160-MP/38
Stock No. WJHM007. Serial: 30101-13881
1995 Cetetherm Plate Heat Exchanger. Model: CT160-MP/38. S/N: 30101-13881. Number of plates: 38. Heat transfer surface area: Approx: 105 sq. ft. MAWP: 145 psi @ 140°F. Volume: 6 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 2 ft. 7 in. L x 1 ft. 6 in. W x 3 ft. 3 in. H.
Plate Heat Exchanger
 1995 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:CT230-MP8-34
Stock No. WJHM013. Serial: 30101-13903
1995 Cetetherm Ceteplate Plate Heat Exchanger. Model: CT230-MP8-34. S/N: 30101-13903. Number of plates: 34. Heat transfer surface area: Approx: 224 sq. ft. MAWP: 145 psi @ 230°F. Volume: 21 gallons. Inlets/outlets: (4) 5-1/2 in. dia. ports. Overall dimensions: 3 ft. L x 2 ft. W x 6 ft. 2 in. H.
Plate Heat Exchanger
 1996 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:M10-BFG
Stock No. WJHM014. Serial: 30101-40939
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40939. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
Plate Heat Exchanger
 1996 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:M10-BFG
Stock No. WJHM015. Serial: 30101-40938
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40938. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
Plate Heat Exchanger
 1996 Cetetherm Ceteplate Plate Heat Exchanger
Mfg: Cetetherm Model:M10-BFG
Stock No. WJHM016. Serial: 30101-40937
1996 Cetetherm Ceteplate Plate Heat Exchanger. Model: M10-BFG. S/N: 30101-40937. Number of plates: 277. Heat transfer surface area: Approx: 780 sq. ft. MAWP: 149 psi @ 275 °F. Volume: 48 gallons. Inlets/outlets: (4) 4 in. dia. ports. Overall dimensions: 6 ft. 1 in. L x 1 ft. 6-1/2 in. W x 3 ft. 2-1/2 in. H.
Plate Heat Exchanger
 APV Plate Heat Exchanger
Mfg: APV Model:JR
Stock No. CFPH358B. Serial:
APV Plate Heat Exchanger. Equipment: Junior S/S. W.O. No. 26541-1. Number of plates: 37. Heat Transfer Surface Area: approx. 14 sq. ft. Inlets/outlets: (6) 1 in. S-line fittings. Overall dimension: 2 ft. 5 in. L x 7 in. W x 2 ft. 2 in. H.
Plate Heat Exchanger
 Stainless Steel Plate Heat Exchanger
Mfg: Model:UF-12H
Stock No. NOI8017. Serial: 66920-1
Stainless Steel Plate Heat Exchanger. Model: UF-12H. S/N: 66920-1. Number of stainless steel plates: 27. Heat transfer surface area: approx. 32 sq. ft. MAWP: 100 psig (cold). MAWP: 150 psig (hot) @ 150° F. Fixed end ports: (2) 2-1/2 in. dia. I-Line fittings, (2) 2-1/2 in. MNPT fittings. Overall dimensions: 2 ft. 11 in. L x 1 ft. 1 in. W x 3 ft. H.
Plate Heat Exchanger
 APV Crepaco Plate Heat Exchanger
Mfg: APV Crepaco Model:
Stock No. PFGL102.7 Serial:
APV Crepaco Plate Heat Exchanger. Type: R51. W.O. 17187. Number of plates: 54. Heat transfer surface area: approx. 304 sq. ft. Inlets: (2) 2 in. dia. S-line fittings, (2) 3 in. dia. S-line fittings. Outlets: (4) 3 in. dia. S-line fittings. Overall dimensions: 6 ft. 10 in. L x 2 ft. 9 in. W x 7 ft. 11 in. H.
Plate Heat Exchanger
 APV Paraflow Plate Heat Exchanger
Mfg: APV Model:
Stock No. PFGL234.7a Serial: M/C 6511639
APV Paraflow Plate Heat Exchanger. Type: HMB. S/N: M/C 6511639. Number of plates: 37. Heat transfer surface area: approx. 113 sq. ft. Inlets/outlets: (8) 2-1/2 in. dia. ACME fittings. Overall dimensions: 7 ft. L x 2 ft. 3 in. W x 6 ft. H.
Plate Heat Exchanger
 APV Mix Cooling System SOLD
Mfg: Model:R51
Stock No. LWS-1.90 Serial: 15277
APV mix cooling system with press, 1250 gph, Model R51, S/N 15277, complete with (1) divider, (62) plates, partlow recorder and stem valve. Plate heat exchanger. SOLD
Plate Heat Exchanger
 ITT Bell and Gossett Plate Heat Exchanger SOLD
Mfg: ITT Bell and Gossett Model:GPX258B-079
Stock No. 35.JWIMS-7.0 Serial: 97654320-01
ITT Bell and Gossett heat exchanger with National Bd # 55919, Model GPX258B-079 and S/N 97654320-01 with 2 in. outlets and 75 plates that are 15 in. x 34 in. Plate heat exchanger.
Plate Heat Exchanger
 APV Plate Heat Exchanger SOLD
Mfg: APV Model:HX
Stock No. 35.HE470A Serial: mc57-841
APV plate heat exchanger, Model HX, S/N mc57-841, stock HE470A, size 2 frame with 11 total plates and 2 in. clamp connection. Plate heat exchanger. SOLD
Plate Heat Exchanger
 SOLD Alfa Laval Plate Heat Exchanger SOLD
Mfg: Alfa Laval Model:P45 -RCF
Stock No. 50.JMB34a.6 Serial: 30100 - 34665
Alfa Laval Plate Heat Exchanger, 1990, Type P45-RCF, Manufacturing Number 30100-34665, Year 1990, Vol-329.2 Liters, 87 PSI at 212F, Working Temperature 100C, 96 Plates 20 in W x 56 in L, 4 in inlet-outlets, 34 in W x 74 in H x 79 in L. SOLD
Plate Heat Exchanger
 ITT Bell and Gossett Plate Heat Exchanger SOLD
Mfg: ITT Bell and Gos Model:GPX
Stock No. 14.107 Serial: 97054320-01
ITT Bell and Gossett Plate Heat Exchanger, model GPX, 1997 year built, serial no. 97054320-01, Part# 5-637-11-079-005, Max Diff Pressure 225 psi, Hot side : mawp 130 psi at 230 degrees F, Mdmt 32 degrees fat 150 psi, Cold side: mawp 150 psi at 230 degrees F, Mdmt 32 degrees fat 150 psi. Plate heat exchanger. SOLD
Plate Heat Exchanger
 DeLaval Plate Heat Exchanger - SOLD
Mfg: DeLaval Model:
Stock No. 192 Serial:
DeLaval plate heat exchanger with 164 plates that are 16 inches x 45 inches and has 2 inch inlets and outlets. Plate heat exchanger. SOLD
Plate Heat Exchanger
 SOLD API Schmidt Bretten Heat Exchanger SOLD
Mfg: API Schmidt Bret Model:Sigma X29
Stock No. 75-SC-4841 Serial: B-980069-303
API Schmidt Bretten heat exchanger, 1998, Model Sigma X29, S/N B-980069-303, part no. 4X29-GRN-057-001, 150 psi, 230 temp, 32 MDMT, plate heat exchanger 108 plates that are around 17 x 35 inches which is approximately 456 square feet. SOLD
Plate Heat Exchanger
 SOLD Plate Heat Exchanger SOLD
Mfg: Model:AT10C-20
Stock No. BIIR03. Serial: 185266-01
Plate Heat Exchanger, Model AT10C-20, S/N 185266-01. Overall dimensions: 21 in. W, 37-½ in. L, 39 in. H. SOLD
Plate Heat Exchanger
 SOLD De Laval Heat Exchanger SOLD
Mfg: De Laval Model:P5-VRB
Stock No. GOB4471 Serial: 1809
De Laval Heat Exchanger, Made in Sweden, Type P5-VRB Number 1809, 22 plates 31-1/2 in. L x 9 in. W, overall dimensions 28 in. L x 28 in. W x 49 in. H SOLD
Plate Heat Exchanger
 SOLD APV Single Effect SR-25 Paravap Plate Evaporator SOLD
Mfg: APV Model:
Stock No. PFG01 Serial:
APV Single Effect SR-25 Paravap Plate Evaporator. Year Built: 1997, This unit has been designed to run high viscosity products . The evaporation rate is somewhat variable depending on the conditions run. All product contact surfaces are food grade polished 316 SS. This complete system would make an ideal test evaporator, a pilot plant evaporation system or an evaporation system to do small quantities of highly valuable product. All it needs to run is to be hooked up to a low-pressure steam source (30 psig), a power supply (440 volts) and a water supply (approx 20 gpm total). All equipment is mounted on a SS skid. Overall dimensions: 9 ft. 8 in. L x 7 ft. W x 8 ft. 4 in. H. Install, startup and training supervision available upon request. SOLD
Plate Heat Exchanger
 SOLD 1996 Armstrong Heat Exchanger Model PFX45
Mfg: Armstrong Model:PFX45
Stock No. TMPM02. Serial: 26557-11
SOLD 1996 Armstrong Heat Exchanger, Model PFX45, S/N 2655711, Ref #: 60309. (4) 4 in. Inlets/outlets. Max Working Pressure: 100 psi @ 300°F, Min design metal temperature: 20°F @ 100 psi. Overall Dimensions 66 in. H x 66 in. L x 21 in. W.
Plate Heat Exchanger
 Sold APV Jr. Plate Heat Exchanger
Mfg: APV Jr. Model:
Stock No. 10.128 Serial:
Sold APV Jr. plate heat exchanger.
Plate Heat Exchanger
 SOLD Alfa Laval Plate Heat Exchanger Type M10-MFG
Mfg: Alfa Laval Model: M10-MFG
Stock No. ENDX001. Serial:
SOLD Alfa Laval Plate Heat Exchanger Type M10-MFG with 26 plates. Built in 2000."A" dimension is 116mm. Unit is 18-1/2 in. W x 28 in. L x 38-3/4 in. H. with 4 in. inlets/ outlet. 56.83 sq. ft. Rated for 150 psi at 320 °F.